All 12v and 24v fittings on our site will require a suitable Transformer or LED Driver to power the fitting or a number of fittings (ideally not exceeding 10 fittings per driver).
The correct type of Transformer or LED Driver will be shown under related products on our site for each 12v or 24v fitting we sell.
We have 5 subcategories for you to choose from . They are Constant Current Milliamp LED transformers, Constant Voltage 24v LED Drivers (ideal for LED Strip Lighting), Ground Burial IP68 Transformers which can go directly into the ground, Plug & Play Transformers for a small number of light fittings within a 10 - 15 metre space where the fittings have a 2 pin male connector which can simply fit into a Plug & Play Transformer, 3 way or 5 way splitter and extension leads. Finally Surface Mounted toroidal transformers which can be mounted on posts or in a waterproof box.
The wattage of the transformer will depend on the number of lights you want to run on it and if you require them to be dimmable or not. It is advisable to take advice from a qualified NIC EIC Certified Electrical Contractor to ensure you have the correct product. We advise placing the transformers above ground where possible, if this is not a viable option then there are a number of waterproof enclosures available on our web site. we would strongly advise that all joints are made using the heat shrink cable joint kits to ensure a 100% watertight connection between the fitting and the transformer. When using a LED DC current driver they should not be loaded to more than 50% of their capacity and with AC toroidal they should be loaded to no more than 80% capacity. Voltage drop can occur if you exceed these parameters. The majority of transformers (with the exception of Plug & Play) can be placed up to 30 metres away from the first fitting.