FREE delivery on orders over £150
114 products Refine products
Sort
Untitled Button
Filter

Spike lights are our most popular type of garden light fitting and available in 240v mains and also 12v low voltage. The LED Spike Lights use LED lamps and many have built in sealed LEDs rather than replaceable light bulbs. 12v fittings use transformers whereas mains 240v are wired straight to your mains 240v cabling.  Spike Lights are the most flexible style of light and can be used for a variety of situations. Place a spike light close to steps to light them up. Installing a purpose designed step light into brickwork can be a lot of work and a Spike Light can offer a cheaper and just as effective solution. With a fully adjustable head for tilt and rotation they are ideal to illuminate trees and items of interest in the garden. They can also be used near water features and you can place a coloured lamp into the fitting or use a dichroic coloured filter for a more dramatic lighting effect. Several have glare shield attachments to reduce direct glare from the lamp source.  A number of finishes and optional accessories are also available for most fittings from Copper and Brass that will blend naturally into the garden environment to Stainless Steel and coloured Powder Coated finishes.  There are a selection of Metal Halide 240v spiked fittings too which are often used as floodlights. 

Where possible we try to advise clients to keep all lighting and transformers above ground to reduce the risk of water ingress. Spike Lights offer a good solution to problem soil areas where drainage is not ideal like clay based soil. The installation is only as good as the installer and we recommend you use a NIC EIC qualified installer who has experience of exterior lighting installations. All joints must be 100% waterproof and we have a selection of waterproof enclosures and heat shrink kits  on our website.

Domo II - 12v - Copper IP56 G4 - Spike Spreadlight - 540mm Height 245mm Dome

The Domo ll spread light is a 12v spike light in Copper and uses G4 LED bulbs not supplied. 5 year warranty. Comes prewired with 1.5m of cable. Shade 245mm diameter x 75mm. 540mm height. Spike 175mm. High grade spun copper shade & solid copper body.
  • £154.80 Inc VAT

AlvaLED

The AlvaLED 240v twin spike light in 316 Stainless Steel uses GU10 LED bulbs not supplied. 3 year warranty. Prewired with 1.5m of cable. Head 60mm diameter, length 135mm, spike 165mm pole 400mm x 25mm. Twin adaptor 120mm. Choice of 12v & 4 finishes.
  • £211.68 Inc VAT

Helia Anthracite IP55 240v 16w 38 Degree Beam Angle 3000k 900 Lumens Surface Mounted Twin Spot Light

The Helia 240v twin spike light in anthracite finish includes 2 x 8w integral sealed LED bulbs. 5 year warranty. Prewired with 3m of cable. Each head 8.5cm length, 5.5cm diameter. Pole 30.3cm. Extension rod code 233165 height 30cm. Stand code 233145.
  • £261.49 Inc VAT

Charleston Coolie - Brass IP54 12v G4 Max Wattage 20w - Spike Or Surface Mounted Spreadlight - Plug & Play

The Charleston Coolie spread light is a 12v spike light in Brass and uses G4 LED bulbs not supplied. 2 year warranty. Comes prewired with 5m of plug and play cable with 2 pin connector. Height 535mm. Diameter of shade 175mm.
  • £103.32 Inc VAT

Charleston – Brass IP54 12v G4 Max Wattage 20w Surface Or Spike Mounted Spreadlight - Plug & Play

The Charleston spread light is a 12v spike light in Brass and uses G4 LED bulbs not supplied. 2 year warranty. Comes prewired with 4.5m of plug and play cable with 2 pin connector. Height 645mm. Has a variety of mounting options.
  • £113.40 Inc VAT

Myra, Aluminium Anthracite Finish IP44 240v GU10 Adjustable Twin Lamp Head, Surface/Spike Mounted Spotlight

Twin free standing twin headed spot light system. This code is for top section only. Code for middle section is 233165, base is 233145. Lamps not included.Max wattage 2 x 4.5w not included. 5 year warranty. Tilt 45 Degrees, Horizontal rotation 340 degrees
  • £195.66 Inc VAT
Previous12345678910

Garden spike lights buying guide


Choosing the right spike lights for your garden

Garden spike lights are a flexible way to highlight planting and outdoor features without permanently recessing a fitting into a path or wall. The spike anchors the light in a suitable planting bed or soft ground, while many fittings have an adjustable head so you can direct the beam towards a tree, shrub, textured wall or feature pot. Unlike a fixed recessed light, a spike fitting can often be repositioned as the garden develops, subject to the cabling and manufacturer's installation instructions.


12v low voltage or 240v mains spike lights?

The first decision is how the lights will be powered. Our low voltage 12v spike lights are intended for compatible low-voltage garden lighting systems and require a correctly rated transformer or driver and suitable cable connections. Check whether a product uses a replaceable lamp or an integrated LED module, and whether a transformer or connector is included. If you have a suitable mains installation planned, browse our 220–240v mains spike lights. These use a different electrical supply and must be installed in accordance with the product instructions and applicable electrical safety requirements.

The two ranges should not be mixed without checking the electrical specification of every component. We recommend using a competent registered electrician for fixed outdoor electrical installations.


Where should you position a garden spike light?

For trees and taller shrubs, try aiming the light from the base upwards through the branches, experimenting with distance and angle before fixing the cable route. A narrow beam can pick out an individual trunk or architectural detail, while a wider beam can spread light across foliage or a low wall. Lower-output fittings can add gentle interest to smaller borders and ornamental grasses without overpowering the rest of the garden.

Spike lights can also help illuminate garden paths and steps, but take care to position and aim them so people can see the change in level without looking directly into the lamp. Where a permanent, built-in solution is preferred, compare our step and brick lights. For discreet uplighting from a paved or landscaped surface, see our buried ground lights.


Brightness, beam angle and colour temperature

The wattage alone does not tell you how bright a modern LED light will appear. Compare the stated lumen output and beam angle where these are provided. For a relaxing planted area, a warm white light can create a softer effect, whereas a cooler colour temperature may suit some contemporary schemes. A narrower beam concentrates light on a smaller feature; a broad beam spreads it over more of the surrounding planting. Some adjustable fittings also accept compatible glare shields or other accessories. Always check compatibility on the individual product listing.


Materials, weather resistance and maintenance

Choose a finish to suit both the setting and the maintenance you are prepared to undertake. Copper and brass develop a changing appearance as they weather, while powder-coated and stainless steel fittings give different contemporary looks. The construction and finish matter, but so does the product's stated IP rating: check the manufacturer's suitability guidance for the intended exposure, especially where irrigation, standing water or spray may be present.

Keep outdoor connections accessible and protected as specified by the manufacturer. Poor drainage and damaged connections can cause problems over time. A spike fitting is not automatically suitable for use underwater or directly beside a pond: products in those locations need explicitly suitable electrical and environmental ratings.


Replaceable bulbs, integrated LEDs and specialist fittings

Some spike spotlights take replaceable lamps, including GU10 or suitable low-voltage lamp types; others have sealed, integrated LED modules. A replaceable-lamp fitting gives you more choice over lamp specifications, but the lamp type, maximum wattage and fitting dimensions must match. Integrated LEDs simplify lamp selection, although replacement arrangements differ by product. We also list specialist metal halide spike lights, a separate technology often associated with larger-scale feature lighting; check the specific product and application rather than assuming it is interchangeable with LED garden lighting.


Frequently asked questions


Can I move a spike light after installation?

The head of many spike fittings is adjustable and the fitting itself can often be repositioned in soft ground. Take care not to strain, bury or damage the cable, and follow the manufacturer's instructions before moving an installed electrical fitting.


Do 12v spike lights need a transformer?

Most 12v lighting systems require a compatible transformer or power supply. The correct type and rating depend on the specific lights and how many are connected.


Are all garden spike lights waterproof?

No. Check each fitting's IP rating and installation instructions. Resistance to rain is not the same as suitability for submersion or continually waterlogged ground.


Which spike light is best for a tree?

Consider the tree's size, how far the light will be positioned from the trunk, the desired beam spread and possible.






Back to top