This is probably the most important section because if you do not get a good 100% watertight connection you will have problems with your lighting. We advise to try and keep lights and electrical supplies above ground in a waterproof enclosure. Always take advice from a local NIC EIC electrical contractor who has installed exterior lighting before and ensure it is signed off by an electrician who also has Part P certification. Ideally we would expect you to use an electrician and not attempt this yourself unless you are using a plug & play arrangement.
There are several ways to make a waterproof joint and several products to choose from. Heat shrink kits are cheap and very effective as are the resin kits or wiska gel that can be put into the connection box with a transformer/ driver. We also advise using copper grease on all screw fixings on the light fitting as this will help reduce corrosion and make it easier to remove the screws when a lamp replacement is required. There is also some ground spikes to mount a waterproof enclosure to rather than a burial kit which is harder to access if problems arise later.
Inline IP68 connector straight IP68 accessory - black nylon
Inline IP68 connector, includes a three way terminal block, and come with two different sized seal bushes.
- £7.02 Inc VAT
3 Pole IP68 In-Line Cable Connector
An IP68 rated in line cable connector. Suitable for cables between 8mm and 12mm diameter.
- £12.36 Inc VAT
IP68 connection box, 3-pole
Waterproof cable jointing sleeve.
- £18.34 Inc VAT
IP68 connection box, 5-pole
Waterproof exterior cable joint box.
- £18.34 Inc VAT
IP68 3 pole Connection Box
IP68 3 pole Connection Box. 116mm L x 43mm W x 30mm H.
- £28.00 Inc VAT
Inline IP68 connector tee IP68 accessory - black nylon
Inline IP68 connector, includes a three way terminal block.
- £8.66 Inc VAT
M20 Cable Gland and Locking Nut - for use with Wiska Junction Box
Use this M20 Cable Gland alongside the Wiska 8 Way Junction Box. Simply screw into the outlets on the junction box and push the cable through the gland.
- £0.63 Inc VAT
M20 Cable Gland and Locking Nut - for use with Wiska Junction Box
Use this M20 Cable Gland alongside the Wiska 8 Way Junction Box. Simply screw into the outlets on the junction box and push the cable through the gland.
- £0.63 Inc VAT
IP68 cable gland c/w lock nut - 25mm Black
IP68 Cable gland kit 25mm black. For a water tight installation.
- £1.20 Inc VAT
IP68 cable gland c/w lock nut - 20mm Black
Waterproof IP68 cable gland kit. Black
- £0.60 Inc VAT
IP68 cable gland c/w lock nut - 20mm White
IP68 cable joint kit for a waterproof connection.
- £0.60 Inc VAT
Cable Gland Adaptor - Black 25mm - 20mm
Cable Gland Adaptor - Black 25mm - 20mm
- £2.40 Inc VAT













































